Cattle Feeding Equipment

Increase the rate of gain on your young stock with the HEATWAVE cost effective milk feeding system that is easy to clean! The HEATWAVE MILK WARM...

One box of cleaning tablets should last for about 6 weeks of cleaning your Heatwave Milk Warmer.   This product has been tested with the Heatwave t...

The Heatwave Milk Warmer comes with 4 calf teats. Extras can be purchased so you don't need to worry about running out.

The Bubble pump will allow you to clean the pipes and prime the system easily, quickly and without disconnecting pipes.  Two Bubble Pumps come stan...

The picture shows a role of 5 meters of silicone tubing. The price is $5.40 per meter.  Silicone Tubing for 4 nipples comes standard with the purch...

  The Bulkhead Push-Fit Assembly helps to attach the silicone tube to the Heatwave Milk Warmer.   

The Straight Barbed Pipe Connector connects the silicone tube at a point where the pump can be connected. It is always great to have some of these ...

 The Collet is Part of the Heatwave Bulkhead Push fit Assembly 8mm which helps to attach the silicone tube to the Heatwave Milk Warmer.   

 The Non-Return Valve is a key component in the Heatwave Milk Warmer as it helps prevent milk from dripping out of the teats as well as keeping mil...

 The Heatwave Exchange Coil is a key component in the Heatwave Milk Warmer as it is needed to warm the milk for the youngstock. It is important to ...

 The Barrel Tap doesn't automatically come with the purchase of the Heatwave Milk Warmer but is  recommended if using a barrel for feeding calves. ...

 The 6mm Y Connector is used for connecting silicone tubes for the Heatwave Milk Warmer.

 The Plastic Push-in Connector is used for connecting the silicone tubes to other components in  the Heatwave Milk Warmer.

 The Yellow Filter is used at the end of silicone tubes to help keep large pieces out that might plug up the Heatwave Milk Warmer.

 The Teat Bayonet fittings used for the Heatwave Milk Warmer fit the Lamb/Goat starter teats, regular teats and calf teats. 

 The Metal Connector/Weight is used with the silicone tubes for the Heatwave Milk Warmer 

 The Standard Stockbord Plate is used to mount the Bayonet Fittings for the Heatwave Milk Warmer 

The Heatwave Reducing "Y" Connector 10mm to 2x 6mm can be used with a barrel tap in a large storage container to connect the silicone tubes of the ...

 The 8mm open ended wrench can be used to press in the on collet on the Heatwave Bulkhead Push fit Assembly unit to help release the connectors. Af...

Heatwave Inlet pipes (Pair) includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Straight Barbed connectors, and 2 Plastic connec...

Heatwave Inlet pipes (Pair) with Bubble Pumps includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Inline Bubble Pumps, and 2 Pla...

Heatwave Outlet pipes (Pair) includes Silicone tube, 2 "Y" Connectors, 4 non-return valves and 2 Plastic connectors to fit into the Heatwave Milk W...

One gallon of Mitrocin cleaner should allow for about 128 weeks of cleaning your Heatwave Milk Warmer and 8oz. can last about 16 weeks. This produc...

ASK US ABOUT LARGER ORDER DISCOUNTS. The Grober mildly acidified milk replacer makes an excellent fit with the Heatwave Milk Warmer and other autom...