Cattle Feeding Equipment

The Mobile 160 Bushel Heavy Duty Advantage Feeder for Cattle- Holds aprox. 8000lbs of barley.  It allows you to Control feed or Free choice Feed o...

Jaylor Single Auger TMR Mixer With four models to choose from, the Jaylor single auger, vertical feed mixers are among our most popular and versa...

Built in a solid three-piece 180 lb rotational-molded form factor, and UV inhibitors built in, the Quad Feeder has nothing to rust, rot, or replace...

As Tough as Your Livestock With a one piece design, polyethylene makeup, built-in ultraviolet inhibitors, and no metal parts other than a metal eye...

160 Bushel Heavy Duty Advantage Feeder for Cattle- Holds aprox. 8000lbs of barley.  Allows you to Control feed or Free choice Feed or *Creep Feed ...

Main features:  Manufactured in Scotland  Heavy-duty circular feed ring 10 feed spaces Solid sheet metal skirt ribbed for strength Ideal for ho...

Features of the CGN - Cattle Creep Gate for the 1200HD Advantage Feeders: Adjustable height horizontal bar Hot gal dipped SHS Latch system to hold...

150 Litre Heavy Duty Advantage Feeder - Holds aprox. 200lbs of barley.  Allows you to Control feed or Free choice Feed Grain to all ages and types ...

51 Bushel mobile Advantage Feeder - Holds aprox. 2500lbs of barley.  Allows you to Control feed or Free choice Feed or *Creep Feed Grain to all age...

Jaylor’s Horizontal Quad Auger TMR Mixers are designed by cattlemen for cattlemen. Our years of experience with feedlot rations guarantees you the ...

The 5300HD is a 108 Bushel Advantage Feeder holding approximately 5300 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep ...

The 1200HD is a 24 Bushel Advantage Feeder holding approximately 1200 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep F...

  The 2500HD is a 51 Bushel Advantage Feeder holding approximately 2500 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep...

Features of the CGW - Cattle Creep Gate for the 5300HD, M5300HD, 2500HD and M2500HD Advantage Feeders: Adjustable height horizontal bar Hot gal di...

Main features:  Manufactured in Scotland  12 feed spaces  Ideal for horned cattle and calves  Supplied in six flat panels for easy assembly  H...

The CGNA Creep Gate can be folded up and out of the way still allowing the roof to be opened and the feeder filled. It latches open and closed. The...

Jaylor Mini TMR Mixers are ideal for a wide range of applications, including feeding smaller dairies when starting out, and specialty groups such a...

Fair Bale Processors Huber Ag Equipment is a western Canadian dealer for Fair Manufacturing’s 7825 Bale Processor. Located in South Dakota, Fair Ma...

The Tray Hay Feeder by Advantage Feeders is made out of Galvanized Steel and the Tray area is Stainless Steel.  The basket is adjustable in height....

Increase the rate of gain on your young stock with the HEATWAVE cost effective milk feeding system that is easy to clean! The HEATWAVE MILK WARM...

One box of cleaning tablets should last for about 6 weeks of cleaning your Heatwave Milk Warmer.   This product has been tested with the Heatwave t...

The Heatwave Milk Warmer comes with 4 calf teats. Extras can be purchased so you don't need to worry about running out.

The Bubble pump will allow you to clean the pipes and prime the system easily, quickly and without disconnecting pipes.  Two Bubble Pumps come stan...

The picture shows a role of 5 meters of silicone tubing. The price is $5.40 per meter.  Silicone Tubing for 4 nipples comes standard with the purch...

  The Bulkhead Push-Fit Assembly helps to attach the silicone tube to the Heatwave Milk Warmer.   

The Straight Barbed Pipe Connector connects the silicone tube at a point where the pump can be connected. It is always great to have some of these ...

 The Collet is Part of the Heatwave Bulkhead Push fit Assembly 8mm which helps to attach the silicone tube to the Heatwave Milk Warmer.   

 The Non-Return Valve is a key component in the Heatwave Milk Warmer as it helps prevent milk from dripping out of the teats as well as keeping mil...

 The Heatwave Exchange Coil is a key component in the Heatwave Milk Warmer as it is needed to warm the milk for the youngstock. It is important to ...

 The Barrel Tap doesn't automatically come with the purchase of the Heatwave Milk Warmer but is  recommended if using a barrel for feeding calves. ...

 The 6mm Y Connector is used for connecting silicone tubes for the Heatwave Milk Warmer.

 The Plastic Push-in Connector is used for connecting the silicone tubes to other components in  the Heatwave Milk Warmer.

 The Yellow Filter is used at the end of silicone tubes to help keep large pieces out that might plug up the Heatwave Milk Warmer.

 The Teat Bayonet fittings used for the Heatwave Milk Warmer fit the Lamb/Goat starter teats, regular teats and calf teats. 

 The Metal Connector/Weight is used with the silicone tubes for the Heatwave Milk Warmer 

 The Standard Stockbord Plate is used to mount the Bayonet Fittings for the Heatwave Milk Warmer