Heatwave
The Heatwave Milk Warmer™ uses heat exchange technology to heat milk on demand. Suitable for feeding lambs, calves and goats. It feeds up to 30 calves or 50 lambs/goats and is suitable for powdered milk or whole milk. It’s also hygienic, as the milk is stored cold.
Labour Saving
It has been estimated it takes 27 man hours to rear 40 calves on ad lib versus 47 hours on a once a day system. Ad lib is a once a day system available ALL day. Rears up to 50 lambs or goat kids.
-
$1,495.00HEATWAVE MILK WARMER
Pyon ProductsIncrease the rate of gain on your young stock with the HEATWAVE cost effective milk feeding system that is easy to clean! The HEATWAVE MILK WARM...
View full details$1,495.00 -
from $2.50Lamb Teats for Heatwave
Pyon ProductsThe Heatwave Milk Machine comes with 4 lamb nipples but these extra lamb teats can be purchased as needed. Although these look very similar and can...
View full detailsfrom $2.50 -
$5.40Silicone Tube for Heatwave Milk Warmer (per Meter)
Pyon ProductsThe picture shows a role of 5 meters of silicone tubing. The price is $5.40 per meter. Silicone Tubing for 4 nipples comes standard with the purch...
View full details$5.40 -
$13.00Heatwave Machine Cleaning Tablets
Pyon ProductsOne box of cleaning tablets should last for about 6 weeks of cleaning your Heatwave Milk Warmer. This product has been tested with the Heatwave t...
View full details$13.00 -
$3.00Lamb/Goat Starter Teat for Heatwave
Pyon ProductsThe starter teats can help get young lambs and goat kids adjust more quickly to the Heatwave Milk Machine. The Heatwave comes with 4 regular lamb n...
View full details$3.00 -
$5.95Non-Return Valve for Heatwave Milk Warmer
Pyon ProductsThe Non-Return Valve is a key component in the Heatwave Milk Warmer as it helps prevent milk from dripping out of the teats as well as keeping mil...
View full details$5.95 -
$19.95Heatwave Teatguard
Pyon ProductsThe Teatguard has been developed to help extend the life of lamb nipples. They help prevent bullying, protect the teats and encourage a good suckin...
View full details$19.95 -
$9.65Teat Bayonet Fitting and screws for Heatwave Milk Warmer
Pyon ProductsThe Teat Bayonet fittings used for the Heatwave Milk Warmer fit the Lamb/Goat starter teats, regular teats and calf teats.
$9.65 -
$45.00Inlet Pair including Bubble Pumps for Heatwave Milk Warmer
Pyon ProductsHeatwave Inlet pipes (Pair) with Bubble Pumps includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Inline Bubble Pumps, and 2 Pla...
View full details$45.00 -
$44.00Outlet Pair for Heatwave Milk Warmer
Pyon ProductsHeatwave Outlet pipes (Pair) includes Silicone tube, 2 "Y" Connectors, 4 non-return valves and 2 Plastic connectors to fit into the Heatwave Milk W...
View full details$44.00 -
$16.05Bubble Pump for Heatwave Milk Warmer
Pyon ProductsThe Bubble pump will allow you to clean the pipes and prime the system easily, quickly and without disconnecting pipes. Two Bubble Pumps come stan...
View full details$16.05 -
$2.95Heatwave Calf Teat
Pyon ProductsThe Heatwave Milk Warmer comes with 4 calf teats. Extras can be purchased so you don't need to worry about running out.
$2.95 -
$54.55Heat Exchange Coil for Heatwave Milk Warmer
Pyon ProductsThe Heatwave Exchange Coil is a key component in the Heatwave Milk Warmer as it is needed to warm the milk for the youngstock. It is important to ...
View full details$54.55 -
$7.70Reducing "Y" Connector 10mm to 2x 6mm for Heatwave Milk Warmer
Pyon ProductsThe Heatwave Reducing "Y" Connector 10mm to 2x 6mm can be used with a barrel tap in a large storage container to connect the silicone tubes of the ...
View full details$7.70 -
$2.65Plastic Push-in Connector for Heatwave Milk Warmer
Pyon ProductsThe Plastic Push-in Connector is used for connecting the silicone tubes to other components in the Heatwave Milk Warmer.
$2.65 -
$3.05Y Connector 6mm for Heatwave Milk Warmer
Pyon ProductsThe 6mm Y Connector is used for connecting silicone tubes for the Heatwave Milk Warmer.
$3.05 -
$15.20Barrel Tap 10mm Outlet for Heatwave Milk Warmer
Pyon ProductsThe Barrel Tap doesn't automatically come with the purchase of the Heatwave Milk Warmer but is recommended if using a barrel for feeding calves. ...
View full details$15.20 -
$9.95Standard Stokbord Plate - Pre Drilled for Heatwave Milk Warmer
Pyon ProductsThe Standard Stockbord Plate is used to mount the Bayonet Fittings for the Heatwave Milk Warmer
$9.95 -
$1.20Yellow Filter for Heatwave Milk Warmer
Pyon ProductsThe Yellow Filter is used at the end of silicone tubes to help keep large pieces out that might plug up the Heatwave Milk Warmer.
$1.20 -
$1.95Straight Barbed Pipe Connector for Heatwave Milk Warmer
Pyon ProductsThe Straight Barbed Pipe Connector connects the silicone tube at a point where the pump can be connected. It is always great to have some of these ...
View full details$1.95 -
$8.10Bulkhead Push-Fit Assembly for Heatwave Milk Warmer 8mm
Pyon ProductsThe Bulkhead Push-Fit Assembly helps to attach the silicone tube to the Heatwave Milk Warmer.
$8.10 -
from $65.00Mitrocin for Heatwave Machine Cleaning
Dairy Supply StoreOne gallon of Mitrocin cleaner should allow for about 128 weeks of cleaning your Heatwave Milk Warmer and 8oz. can last about 16 weeks. This produc...
View full detailsfrom $65.00 -
$17.9513 AMP CIRCUIT BREAKER (Parts for Heatwave)
Pyon ProductsThe 13 amp circuit breaker is for repair of the Heatwave Milk Warmer. This item is sometimes requested for repair and could be helpful to have on...
View full details$17.95 -
$28.95Inlet Pair for Heatwave Milk Warmer
Pyon ProductsHeatwave Inlet pipes (Pair) includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Straight Barbed connectors, and 2 Plastic connec...
View full details$28.95 -
$1.35Collet for Heatwave Milk Warmer 8mm
Pyon ProductsThe Collet is Part of the Heatwave Bulkhead Push fit Assembly 8mm which helps to attach the silicone tube to the Heatwave Milk Warmer.
$1.35 -
$11.95THERMAL CUT OUT SWITCH 55 deg. c (Parts for Heatwave)
Pyon ProductsThe Thermal cutout switch is for repair of the Heatwave Milk Warmer. This item is occasionally requested for repair.
$11.95 -
$5.85Metal Connector/Weight for Heatwave Milk Warmer
Pyon ProductsThe Metal Connector/Weight is used with the silicone tubes for the Heatwave Milk Warmer
$5.85 -
$245.001500 Mat Heater (Parts for Heatwave)
Pyon ProductsThe 1500 Mat heater is for repair of the Heatwave Milk Warmer. This item is seldom requested for repair.
$245.00 -
$114.50Wet Nurse Competitive Edge Lamb Milk Replacer for the Heatwave
PMT GroupThe Wet Nurse Milk Replacer is acidified and can be used for feeding milk in automatic feeders such as the Heatwave Milk Machine. PMT's Wet Nurse™ ...
View full details$114.50 -
$2.15Wrench -8mm for Heatwave Milk Warmer
Pyon ProductsThe 8mm open ended wrench can be used to press in the on collet on the Heatwave Bulkhead Push fit Assembly unit to help release the connectors. Af...
View full details$2.15 -
$299.50THERMOSTAT SUB-ASSEMBLY (Parts for Heatwave)
Pyon ProductsThe Thermostat sub - assembly for repair of the Heatwave Milk Warmer. This item is very seldom requested for repair.
$299.50 -
$5.95Right Angle Connector 10mm to 6mm for Heatwave Milk Warmer
Pyon ProductsThe Heatwave Right Angle Connector 10mm to 6mm can be used to connect the silicone tubes of the outlet pipes coming from the Heatwave Milk Warmer. ...
View full details$5.95
