Ritchie

The Portable Sheep Race is made with a hot dipped galvanized finish. The sides can be adjusted for width and the joining pins are long enough that ...

The Aluminum Sheep Panel is manufactured in lightweight, heat treated aluminum for increased rigidity. These robust panels are great for a race as ...

The Ritchie Cap and Socket is a 178 mm square ground socket with a steep cap to close of when not in use. It is designed to take 50mm x 50mm square...

This robust Ritchie feed & water trough has no sharp corners to trap feed and is easy to clean. It has deep hanging hooks to fit over fencing.

The Ritchie Midland Standard Field Gates are a robust design that allow internal venting to the structure and are designed to reduce the risk of ta...

The Ritchie Half Meshed Field Gates are a robust design that allow internal venting to the structure. They have a "bushed" hanging end and come wit...

Main features:  Designed for incorporating into a cattle race to easily control cattle movement Opens to both left and right sides Substantiall...

The Ritchie Deer Gates come three options: 10 Rail Gates, Part Mesh 7 Rail Gates and Full Mesh Gates. The mesh is 3" x 3" 10 Gauge.  These items ma...

The Ritchie Two Part Gate Kit for Field Gates comes supplied with a bolt on kit to create a two part gate opening. The kit comprises of an over cen...

The Ritchie D-Loop Bracket for Field Gates comes supplied with a bolt on fitting kit. It has a hot dipped galvanized finish.

The Heavy-Duty Center Hasp for Ritchie panels comes with bolt on fitting kit. No drilling is required. It has a hot dipped galvanized finish.

The Ritchie Tubar Posts can be used for either hanging or latching the Tubar gate. They are supplied with a welded metal end cap and have a hot dip...

With the convenient Ritchie Draft Pro 3 you can weigh your sheep as well as sort them 3 ways. The Draft Pro has a larger capacity than the lamb wei...

Increased accuracy and convenience come with Ritchie's entry level digital lamb scales.  A robust fully HDG unit with bi-fold doors front and rear ...

Ritchie Sheep Panel posts for building in or bolting down. They are hot dipped galvanized finish.

The Ritchie Sheep Race Joiner keeps the race-way panels at fixed centers and has varying hole positions to allow different race-way widths. It is a...

The Joining Pin Link Bracket is required for the Trombone Systems. The Joining Link Bracket is needed to attach the Curved Inner Panel to an open r...

Ritchie Cattle Crates include a bracket set already welded in place as standard.  If using a different type of squeeze these may need to be purchas...

The Curved Panel is required for the Starter Sheep Handling System. The Curved Panel can be joined to other sheeted or open rail panels and gates ...

The Curved Outer Panel is required for the Trombone System. The Joining Link Bracket is needed to attach the Curved Inner Panel to an open rail or ...

The Curved Inner Panel is required for the Trombone System. The Joining Link Bracket is needed to attach the Curved Inner Panel to an open rail or ...

The Ritchie Non-Return Gate is supplied in pairs to fit a 2ft alley. They are spring loaded, offering the sheep one direction travel only.  These A...

The Ritchie Draft/Stop Gate for a 2ft alley allows you to draft sheep to either side or hold them in the race. It comes with an adjustment to slope...

The Three Way Drafting Gate for Sheep fits in a 2ft alley way. It has a three position gate for drafting sheep to either side or straight through. ...

The Ritchie Walk through Guillotine Gate is one of the popular Ritchie items. It allows for lightness and speed of operation, the gate hinges to al...

The Ritchie Guillotine Gate gives you fast effective control and movement. Opening and closing the gate can be accomplished remotely due to the lon...

The Ritchie Sheep Panel and Gate Combination has a positive top operated spring loaded bolt catch as well as a gate adjustment on the bottom hinge....

The Ritchie Two Part Gates in Frame have a positive top operated throwover catch with a gate adjustment on the bottom hinge. These gates have the h...

The Ritchie Lamb Creep Panel is robustly constructed with tubular steel frame.  The spacing is easily adjusted between the rollers. You steel rolle...

The Ritchie Joining Pin can be used for joining the Ritchie Panels including the Sheeted Sheep Panels and the Open Rail Sheep Panels as well as the...

Main features of the Heavy Duty Ritchie Joining Stake: Manufactured in Scotland  Manufactured from 20 mm solid round rod Umbrella type handle for ...

Main Features: Feeding through section pivots in and out of the pen, allowing feed to be changed outside the pen and moved to the ewes Locks wit...

Wire Hay Rack - 3ft length Main Features Single sided hook-over hay rack with deep hooks and securing bolts All welded, hot dipped galvanized fini...

3 Way Auto Sort Gate NEWLY UPDATED - NOW COMES WITH RUBBER FLOORING! Gate attaches easily to the exit end of the Combi Clamp Operable from the wor...

UPDATE YOUR CURRENT COMBI CLAMP WITH THE NEW RUBBER FLOORING. Rubber Flooring update for the 3-Way Sorting Gate and Auto Sort Rubber Flooring upd...