Sheep Feeding Equipment

The M5300HD is a 108 Bushel mobile Advantage Feeder holding approximately 5300 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or ...

The 5300HD is a 108 Bushel Advantage Feeder holding approximately 5300 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep ...

HayBoss Feeders HayBoss Feeders™ is a revolutionary, no-waste feeding system that provides safe and clean forage for animals of any size. We believ...

Jaylor Mini TMR Mixers are ideal for a wide range of applications, including feeding smaller dairies when starting out, and specialty groups such a...

The 1200HD is a 24 Bushel Advantage Feeder holding approximately 1200 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep F...

Jaylor Single Auger TMR Mixer With four models to choose from, the Jaylor single auger, vertical feed mixers are among our most popular and versa...

The Advantage Feeders Mineral Attachment holds 240 lbs of lose mineral and helps to keep the mineral dry as well as from contamination. This minera...

Main Features of the Feed Bunk Panel:  Adjustable M16 eyebolts to facilitate easy installation Easily adjustable height feed rails Treated timber...

JUG Waterers keep your livestock's water fresh and clean. Open bowl design, with up to 4 bowls for high-traffic areas. Straight forward use for ani...

Main Features:  Adjustable M16 eyebolts to facilitate easy installation Internally vented Treated timber panels Dimensions Length 15 FT ...

Increase the rate of gain on your young stock with the HEATWAVE cost effective milk feeding system that is easy to clean! The HEATWAVE MILK WARM...

150 Litre Heavy Duty Advantage Feeder - Holds aprox. 200lbs of barley.  Allows you to Control feed or Free choice Feed Grain to all ages and types ...

As Tough as Your Livestock With a one piece design, polyethylene makeup, built-in ultraviolet inhibitors, and no metal parts other than a metal eye...

51 Bushel mobile Advantage Feeder - Holds aprox. 2500lbs of barley.  Allows you to Control feed or Free choice Feed or *Creep Feed Grain to all age...

Main Features:  Adjustable M16 eyebolts to facilitate easy installation Internally vented Treated timber panels Dimensions Length 10 FT ...

JUG Waterers keep your livestock's water fresh and clean. Open bowl design, with up to 4 bowls for high-traffic areas. Straight forward use for ani...

Jaylor’s Horizontal Quad Auger TMR Mixers are designed by cattlemen for cattlemen. Our years of experience with feedlot rations guarantees you the ...

  The 2500HD is a 51 Bushel Advantage Feeder holding approximately 2500 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep...

The Ritchie Lamb Creep Panel is robustly constructed with tubular steel frame.  The spacing is easily adjusted between the rollers. You steel rolle...

Built in a solid three-piece 180 lb rotational-molded form factor, and UV inhibitors built in, the Quad Feeder has nothing to rust, rot, or replace...

JUG Waterers keep your livestock's water fresh and clean as well as being energy efficient. Purchase the Jug Waterer accessories or extra parts as...

The Ritchie Wrapped Baled Handler handles a maximum sized round and square bales. It is made to handle round or square bales from both directions. ...

Main features:  Collapsible tines for safe storage and transport Folds and unfolds from within the tractor cab Rear entry curved upper tines Ca...

The Bale Inverter handles round silage bales up to 5 ft in diameter and can lock either the left or right arm for stacking in confined areas.  The ...

Fair Bale Processors Huber Ag Equipment is a western Canadian dealer for Fair Manufacturing’s 7825 Bale Processor. Located in South Dakota, Fair Ma...

The Cradle Hay Feeder is suitable for sheep. The gap between the bars is 8" and fits any size of bale.  The feeders are galvanized and have a stain...

JUG Waterers are an energy efficient way to provide clean fresh water to your livestock. The earth tubes help give you that geo-thermal heat for m...

The Sliding Gate Hay Feeder is a great feeder for sheep and goats if using the large or small square bales.  This feeder is being used for calves a...

The Heatwave Milk Machine comes with 4 lamb nipples but these extra lamb teats can be purchased as needed. Although these look very similar and can...

The Teatguard has been developed to help extend the life of lamb nipples. They help prevent bullying, protect the teats and encourage a good suckin...

One box of cleaning tablets should last for about 6 weeks of cleaning your Heatwave Milk Warmer.   This product has been tested with the Heatwave t...

The starter teats can help get young lambs and goat kids adjust more quickly to the Heatwave Milk Machine. The Heatwave comes with 4 regular lamb n...

The Bubble pump will allow you to clean the pipes and prime the system easily, quickly and without disconnecting pipes.  Two Bubble Pumps come stan...

The picture shows a role of 5 meters of silicone tubing. The price is $5.40 per meter.  Silicone Tubing for 4 nipples comes standard with the purch...

  The Bulkhead Push-Fit Assembly helps to attach the silicone tube to the Heatwave Milk Warmer.   

The Straight Barbed Pipe Connector connects the silicone tube at a point where the pump can be connected. It is always great to have some of these ...

 The Collet is Part of the Heatwave Bulkhead Push fit Assembly 8mm which helps to attach the silicone tube to the Heatwave Milk Warmer.   

 The Non-Return Valve is a key component in the Heatwave Milk Warmer as it helps prevent milk from dripping out of the teats as well as keeping mil...

 The Heatwave Exchange Coil is a key component in the Heatwave Milk Warmer as it is needed to warm the milk for the youngstock. It is important to ...

 The Barrel Tap doesn't automatically come with the purchase of the Heatwave Milk Warmer but is  recommended if using a barrel for feeding calves. ...

 The 6mm Y Connector is used for connecting silicone tubes for the Heatwave Milk Warmer.

 The Plastic Push-in Connector is used for connecting the silicone tubes to other components in  the Heatwave Milk Warmer.

 The Yellow Filter is used at the end of silicone tubes to help keep large pieces out that might plug up the Heatwave Milk Warmer.

 The Teat Bayonet fittings used for the Heatwave Milk Warmer fit the Lamb/Goat starter teats, regular teats and calf teats. 

 The Metal Connector/Weight is used with the silicone tubes for the Heatwave Milk Warmer 

 The Standard Stockbord Plate is used to mount the Bayonet Fittings for the Heatwave Milk Warmer 

The Heatwave Reducing "Y" Connector 10mm to 2x 6mm can be used with a barrel tap in a large storage container to connect the silicone tubes of the ...