Sheep Health & Management

The Remote Control Lever for the Draft/Stop Sheep Gate gives you the ability to run the sorting sheep gate from a distance.

The Te Pari LPG Calf Dehorner comes standard with the 18 mm dehorning tips. Sizes 14mm, 16mm, 18mm, and 20mm tips can be purchased as spares.   

QUICK, EFFECTIVE AND EFFICIENT. The Te Pari LPG Calf Dehorner is a NZ-made, fully portable LPG gas fired unit that will constantly maintain a high ...

The Portable Starter Sheep System is made with a hot dipped galvanized finish. The sides can be adjusted for width and the joining pins are long en...

JUG Waterers are an energy efficient way to provide clean fresh water to your livestock. The earth tubes help give you that geo-thermal heat for m...

Tru-Test Weigh Platform Low profile design No sharp edges Rubber mat secured to platform with aluminium plates on each end 1/2" rubber mat for tra...

The SRS2 EID Stick Reader makes scanning easy.  Quickly read, record and transfer your livestock EID Tag information with the durable, easy to use ...

Increase the rate of gain on your young stock with the HEATWAVE cost effective milk feeding system that is easy to clean! The HEATWAVE MILK WARM...

The Heatwave Milk Machine comes with 4 lamb nipples but these extra lamb teats can be purchased as needed. Although these look very similar and can...

The Teatguard has been developed to help extend the life of lamb nipples. They help prevent bullying, protect the teats and encourage a good suckin...

One box of cleaning tablets should last for about 6 weeks of cleaning your Heatwave Milk Warmer.   This product has been tested with the Heatwave t...

The starter teats can help get young lambs and goat kids adjust more quickly to the Heatwave Milk Machine. The Heatwave comes with 4 regular lamb n...

The Heatwave Milk Warmer comes with 4 calf teats. Extras can be purchased so you don't need to worry about running out.

The Bubble pump will allow you to clean the pipes and prime the system easily, quickly and without disconnecting pipes.  Two Bubble Pumps come stan...

The picture shows a role of 5 meters of silicone tubing. The price is $5.40 per meter.  Silicone Tubing for 4 nipples comes standard with the purch...

  The Bulkhead Push-Fit Assembly helps to attach the silicone tube to the Heatwave Milk Warmer.   

The Straight Barbed Pipe Connector connects the silicone tube at a point where the pump can be connected. It is always great to have some of these ...

 The Collet is Part of the Heatwave Bulkhead Push fit Assembly 8mm which helps to attach the silicone tube to the Heatwave Milk Warmer.   

 The Non-Return Valve is a key component in the Heatwave Milk Warmer as it helps prevent milk from dripping out of the teats as well as keeping mil...

 The Heatwave Exchange Coil is a key component in the Heatwave Milk Warmer as it is needed to warm the milk for the youngstock. It is important to ...

 The Barrel Tap doesn't automatically come with the purchase of the Heatwave Milk Warmer but is  recommended if using a barrel for feeding calves. ...

 The 6mm Y Connector is used for connecting silicone tubes for the Heatwave Milk Warmer.

 The Plastic Push-in Connector is used for connecting the silicone tubes to other components in  the Heatwave Milk Warmer.

 The Yellow Filter is used at the end of silicone tubes to help keep large pieces out that might plug up the Heatwave Milk Warmer.

 The Teat Bayonet fittings used for the Heatwave Milk Warmer fit the Lamb/Goat starter teats, regular teats and calf teats. 

 The Metal Connector/Weight is used with the silicone tubes for the Heatwave Milk Warmer 

 The Standard Stockbord Plate is used to mount the Bayonet Fittings for the Heatwave Milk Warmer 

The Heatwave Reducing "Y" Connector 10mm to 2x 6mm can be used with a barrel tap in a large storage container to connect the silicone tubes of the ...

 The 8mm open ended wrench can be used to press in the on collet on the Heatwave Bulkhead Push fit Assembly unit to help release the connectors. Af...

Heatwave Inlet pipes (Pair) includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Straight Barbed connectors, and 2 Plastic connec...

Heatwave Inlet pipes (Pair) with Bubble Pumps includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Inline Bubble Pumps, and 2 Pla...

Heatwave Outlet pipes (Pair) includes Silicone tube, 2 "Y" Connectors, 4 non-return valves and 2 Plastic connectors to fit into the Heatwave Milk W...

The EasyDose™ Gun from Te Pari is the easiest Injector or Syringe on the market. Designed to reduce hand strain with all day comfort. Perfect for a...

Te Pari Dosing Gun Barrel Assembly including piston can be purchased separately in 6ml, 14ml or 70ml sizes.  Buying an extra barrel assembly can ma...

The Heatwave Right Angle Connector 10mm to 6mm can be used to connect the silicone tubes of the outlet pipes coming from the Heatwave Milk Warmer. ...

3 Way Auto Sort Gate NEWLY UPDATED - NOW COMES WITH RUBBER FLOORING! Gate attaches easily to the exit end of the Combi Clamp Operable from the wor...

Store up to 250 thousand records in 250 weighing sessions. For each animal, you can record up to 3 ID's and 3 pieces of information (other than wei...

UPDATE YOUR CURRENT COMBI CLAMP WITH THE NEW RUBBER FLOORING. Rubber Flooring update for the 3-Way Sorting Gate and Auto Sort Rubber Flooring upd...

Store up to 250 thousand records in 250 weighing sessions. For each animal, you can record up to 3 ID's and 3 pieces of information (other than wei...

The ultimate Indicator designed to capture a wide range of animal information needed to help make the most of well informed, profitable decisions ...

Tru-With the capability to record information against Electronic ID (EID) or Visual tags, you can easily capture and analyse individual animal perf...

HD5T 11,000 lb Capacity TRU-TEST Load Bars Tough, reliable and easy to Install under your squeeze chute.  Tru-Test load bars are recognized for the...

Bluetooth® connectivity allows you to record animal weights and configure settings using the Data Link app. The high contrast display is clearly v...

Main features of the Tru-Test MP800 Load Bars:  Versatile. Can be temporarily installed and when used with the lightweight Tru-Test aluminium...