Sheep and Goat Products

NEWLY UPDATED RITCHIE COMBI CLAMP NOW COMES WITH RUBBER FLOORING! The Combi Clamp Sheep & Goat Handling System allows you to process your sheep...

The 1200HD is a 24 Bushel Advantage Feeder holding approximately 1200 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep F...

Main features:   Pin together for easy assembly (pin included) 7 horizontal rails with smaller spacing at the bottom to keep small lambs in. over...

The Advantage Feeders Mineral Attachment holds 240 lbs of lose mineral and helps to keep the mineral dry as well as from contamination. This minera...

Increase the rate of gain on your young stock with the HEATWAVE cost effective milk feeding system that is easy to clean! The HEATWAVE MILK WARM...

DOCKING IRONS Essential docking tools for optimum animal health Tail docking of lambs remains an important husbandry practice in order to maint...

The Ritchie Lamb Creep Panel is robustly constructed with tubular steel frame.  The spacing is easily adjusted between the rollers. You steel rolle...

Increased accuracy and convenience come with Ritchie's entry level digital lamb scales.  A robust fully HDG unit with bi-fold doors front and rear ...

150 Litre Heavy Duty Advantage Feeder - Holds aprox. 200lbs of barley.  Allows you to Control feed or Free choice Feed Grain to all ages and types ...

TAILING CHUTES Save time, money and your back! The Te Pari Tailing Chute is an efficient and practical design to help ranchers save time and money....

The 5300HD is a 108 Bushel Advantage Feeder holding approximately 5300 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep ...

The Lamb Cushion Wall is an optional attachment for the Combi Clamp Sheep Handling System.  It allows lambs to be vaccinated and dewormed with grea...

Heatshield for Te Pari Docking Guns. The Te Pari Docking Iron heatshield is designed to fit the original Te Pari Docking Irons. 

The Premium Cattle Panels are a foot taller than the regular Cattle Panels and include lamb bars making them suitable for a wide range of livestock...

The Ritchie LamPram is a convenient cart for carrying lambs safely between pens.  The see through mesh causes less stress for the lambs and ensures...

With the convenient Ritchie Draft Pro 3 you can weigh your sheep as well as sort them 3 ways. The Draft Pro has a larger capacity than the lamb wei...

Increased accuracy and convenience come with Ritchie's Tru-Test lamb scales.  A robust fully HDG unit with bi-fold doors front and rear incorporati...

51 Bushel mobile Advantage Feeder - Holds aprox. 2500lbs of barley.  Allows you to Control feed or Free choice Feed or *Creep Feed Grain to all age...

  The 2500HD is a 51 Bushel Advantage Feeder holding approximately 2500 lbs of barley.  It allows you to *Control Feed, Free Choice Feed or **Creep...

The Heatwave Milk Machine comes with 4 lamb nipples but these extra lamb teats can be purchased as needed. Although these look very similar and can...

The Teatguard has been developed to help extend the life of lamb nipples. They help prevent bullying, protect the teats and encourage a good suckin...

One box of cleaning tablets should last for about 6 weeks of cleaning your Heatwave Milk Warmer.   This product has been tested with the Heatwave t...

The starter teats can help get young lambs and goat kids adjust more quickly to the Heatwave Milk Machine. The Heatwave comes with 4 regular lamb n...

The Bubble pump will allow you to clean the pipes and prime the system easily, quickly and without disconnecting pipes.  Two Bubble Pumps come stan...

The picture shows a role of 5 meters of silicone tubing. The price is $5.40 per meter.  Silicone Tubing for 4 nipples comes standard with the purch...

  The Bulkhead Push-Fit Assembly helps to attach the silicone tube to the Heatwave Milk Warmer.   

The Straight Barbed Pipe Connector connects the silicone tube at a point where the pump can be connected. It is always great to have some of these ...

 The Collet is Part of the Heatwave Bulkhead Push fit Assembly 8mm which helps to attach the silicone tube to the Heatwave Milk Warmer.   

 The Non-Return Valve is a key component in the Heatwave Milk Warmer as it helps prevent milk from dripping out of the teats as well as keeping mil...

 The Heatwave Exchange Coil is a key component in the Heatwave Milk Warmer as it is needed to warm the milk for the youngstock. It is important to ...

 The Barrel Tap doesn't automatically come with the purchase of the Heatwave Milk Warmer but is  recommended if using a barrel for feeding calves. ...

 The 6mm Y Connector is used for connecting silicone tubes for the Heatwave Milk Warmer.

 The Plastic Push-in Connector is used for connecting the silicone tubes to other components in  the Heatwave Milk Warmer.

 The Yellow Filter is used at the end of silicone tubes to help keep large pieces out that might plug up the Heatwave Milk Warmer.

 The Teat Bayonet fittings used for the Heatwave Milk Warmer fit the Lamb/Goat starter teats, regular teats and calf teats. 

 The Metal Connector/Weight is used with the silicone tubes for the Heatwave Milk Warmer 

 The Standard Stockbord Plate is used to mount the Bayonet Fittings for the Heatwave Milk Warmer 

The Heatwave Reducing "Y" Connector 10mm to 2x 6mm can be used with a barrel tap in a large storage container to connect the silicone tubes of the ...

 The 8mm open ended wrench can be used to press in the on collet on the Heatwave Bulkhead Push fit Assembly unit to help release the connectors. Af...

Heatwave Inlet pipes (Pair) includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Straight Barbed connectors, and 2 Plastic connec...

Heatwave Inlet pipes (Pair) with Bubble Pumps includes Silicone tube, 2 Yellow filters, 2 Stainless steel weights, 2 Inline Bubble Pumps, and 2 Pla...

Heatwave Outlet pipes (Pair) includes Silicone tube, 2 "Y" Connectors, 4 non-return valves and 2 Plastic connectors to fit into the Heatwave Milk W...

One gallon of Mitrocin cleaner should allow for about 128 weeks of cleaning your Heatwave Milk Warmer and 8oz. can last about 16 weeks. This produc...

Use the ink stamps to mark your treated livestock with the Simcro VS Injector guns. Each stamp should be able to mark about 300 livestock. Comes in...

Simcro VS Injector Designed for swine and beef producers, the Simcro VS Injector gives you ultimate flexibility to protect you, your staff, your...

Non-Needle Guard Assembly. Use with Simcro VS Injector guns.

The Heatwave Right Angle Connector 10mm to 6mm can be used to connect the silicone tubes of the outlet pipes coming from the Heatwave Milk Warmer. ...